Cornelius Keg Systems

The refurbished kegs are 56cm x 23cm. The used kegs are 64cm x 21.5cm.


  • A (Three Pack) Fully Refurbished Second Hand Corny Keg (19lt Ball Lock) Grade A
    We now have a limited amount of fully refurbished Cornelius kegs available for a one time only offer. This is the lowest price you will ever get one of these kegs for.  Kegs are washed (inside, outside), polished (outside), (inside the keg  is ideal), pressure tested, with an air pressure valve, plastic lid feet new and new gaskets where required (one big o-ring and two posts gaskets). Like new. Ready to use!   Ideal for...
    £170.00  £153.00
    Save: 10% off
    Add:


  • A Fully Refurbished Second Hand Corny Keg (19lt Ball Lock) Grade A
    We now have a limited amount of fully refurbished Cornelius kegs available for a one time only offer. This is the lowest price you will ever get one of these kegs for.  Kegs are washed (inside, outside), polished (outside), (inside the keg  is ideal), pressure tested, with an air pressure valve, plastic lid feet new and new gaskets where required (one big o-ring and two posts gaskets). Like new. Ready to use!   Ideal for...
    £60.00  £54.00
    Save: 10% off
    Add:


  • A Used Corny Keg (19lt Ball Lock)
    We have a limited amount of secondhand Cornelius kegs available for a one time only offer. This is the lowest price you will ever get one of these kegs for. Kegs sold as is. The kegs may contain scratches and dents.  Ball lock kegs with pressure relief valve in the lid.   Ideal for dispensing beers and wines under pressure. CO2 gas is injected in through the post marked IN on top of the keg and is connected via a Grey Disconnect. It...
    £41.95  £37.75
    Save: 10% off
    Sold Out


  • A Used Corny Kegs - Pack of 3 (19lt Ball Lock) ***
    We have a limited amount of secondhand Cornelius kegs available for a one time only offer. This is the lowest price you will ever get one of these kegs for. Kegs sold as is. The kegs may contain scratches and dents.  Ball lock kegs with pressure relief valve in the lid.   Ideal for dispensing beers and wines under pressure. CO2 gas is injected in through the post marked IN on top of the keg and is connected via a Grey Disconnect. It...
    £120.00  £108.00
    Save: 10% off
    Sold Out


  • Adjustable Pressure Valve (0 - 4 bar/ 0 - 60 psi)
    To relieve pressure when transferring or filtering beer from one keg to another. This connects to the keg you are filtering into and has an adjustable relief valve for letting pressure off as the keg fills up. This unit incorporates a pressure gauge. You need to wind/unwind the end of the valve to adjust the pressure.
    £22.95
    Sold Out


  • Ball Lock Keg Gas Post 19/32"
    Post attaches to the beverage gas in port of the keg. Gas ball lock quick disconnects will fit these posts.
    £3.95
    Sold Out


  • Ball Lock Keg Gas Post 9/16"
    Post attaches to the beverage gas in port of the keg. Gas ball lock quick disconnects will fit these posts.
    £3.95
    Sold Out


  • Ball Lock Keg Liquid Post 19/32"
    Post attaches to the beverage out threaded port of the keg. Gas ball lock quick disconnects will fit these posts.
    £3.95
    Add:


  • Ball Lock Keg Liquid Post 9/16"
    Post attaches to the beverage out threaded port of the keg. Gas ball lock quick disconnects will fit these posts.
    £3.95
    Add:


  • Beer Line Assembly - Ball Lock and Tap
    6.5mm liquid line with plastic Party Faucet, Hose Clamps and Ball Lock Disconnect. Hooks up to a Cornelius keg. 50cm line length. Perfect for dispensing your homebrew.
    £15.95
    Sold Out


  • Carbonating Keg Lid
    The Soda Keg LId is the easiest way to carbonate your beer. Simply attach tubing and carbonation stone to the underside of the lid.(tubing and carbonation stone sold separately). This provides the quickest and easiest means of force carbonating kegs and begin serving beer swiftly.
    £24.95
    Sold Out


  • CO2 Distributor 2 Way with 1/4" barb shutoff
    This CO2 distributor is used to supply gas to multiple kegs with one regulator. The manifold has 1/4" barbed shut-off valves with an integral check valve to prevent backflow of gas or liquid.
    £22.95
    Add:


  • CO2 Distributor 3 Way with 1/4" barb shutoff
    This CO2 distributor is used to supply gas to multiple kegs with one regulator. The manifold has 1/4" barbed shut-off valves with an integral check valve to prevent backflow of gas or liquid.
    £31.95
    Add:


  • CO2 Distributor 4 Way w/ 1/4" barb shutoff
    This CO2 distributor is used to supply gas to multiple kegs with one regulator. The manifold has 1/4" barbed shut-off valves with an integral check valve to prevent backflow of gas or liquid.
    £39.95
    Add:


  • CO2 Regulator
    This regulator is made of high quality machined brass body and is ideal for dispensing as it has an output gauge with small PSI increments making setting your gauge simple. The regulator has a large body for high flow rates and comes with a precision diaphragm for more accurate adjustment. Regulator also includes large adjustment knob for easy adjustment.   The thread will fir a standard CO2 large gas bottle similar to pub style gas. The...
    £39.95
    Add:


  • Cornelius AEB Kegs - Ball Lock Corny Kegs (NEW)
    Ideal for dispensing beers and wines under pressure. CO2 gas is injected in through the post marked IN on top of the keg and is connected via a Grey Disconnect. This keg can be presurised to over 100psi making it much more relaible than the standard plastic keg. It has approximately a 19 litre capacity.
    £120.00
    Add:


  • Corny Keg Lid Foot
    To replace a foot, remove old foot and just press new one into place.
    £1.25
    Add:


  • Corny Keg Neoprene Sleeve
    Made from durable lightweight insulating neoprene material. The sleeve slides over a 5 gallon keg. Slip in ice blankets between the keg and the sleeve for a portable cooling solution. • Fitted specfically for 5 gallon kegs • Durable, heavy-duty neoprene • Keeps the cold in your keg for an extended time • Protects the external finish of your keg • Keg not included
    £18.95
    Add:


  • European Compensator Tap
    These are chrome platted homebrew beer taps. Traditional European design with long spout for decreased foam. Adjustable flow control lever allows pouring of highly-carbonated and/or highly-pressurised beer with less foam. Easily mountable, with long shank. Takes 3/8 beer gas line.
    £49.95
    Sold Out


  • Keg Jumper (Ball Lock - Beverage to Beverage)
    Use the Keg Jumper to push beer or sanitizer from one keg to the next. Ideal for transferring beer off settled yeast to another keg or cleaning/sanitizing multiple kegs.
    £19.95
    Add:


  • Nitrogen Dual Gauge Regulator with 3/8 John Guest Outlet Manifold
    Nitrogen professional Dual Gauge Regulator. Nitrogen pressure reducer with one free outlet – G3/4 – red mark 6 bar – bottle connection w21.8mm ch30. Comes with single manifold outlet fitted with John Guest which takes 3/8 gas line for ease of use. The manifold outlet is fitted with an open / close valve. These are top of the range regulators.   6 Bar (85 PSI)   These pressure regulators fully meet the highest international...
    £64.95
    Sold Out


  • O Ring Lid
    Fits the Cornelius Keg lid providing an airtight seal.
    £2.95
    Add:


  • Picnic Faucet
    Black plastic thumb lever faucet.  Can be used for picnic pumps or for corney keg sampling. Standard 1/4" barb connection. Economical. Durable Plastic.
    £2.95
    Add:


  • Premium Regulated CO2 Charger
    The Premium Regulated CO2 Charger is made from machined anodised aluminium. The charger is very compact but is just large enough for a very small regulator. For use with threaded co2 cartridges 1/4 flared connection for threaded (MFL) gas disconnects. For use with pin or ball lock kegs * Keg, 16g CO2 cartridge and disconnect not included.*   Works with this Grey Connect and these CO2 Bulbs.
    £44.95
    Sold Out


  • Pressure Relief Valve
    This is a new, replacement pressure relief valve that fits most Cornelius-style soda kegs.
    £4.00
    Sold Out


  • Quick Disconnect IN Complete - new Grey
    This quick fit connector allows you to connect a gas line to your keg. Using a gas supply gives you the pressure needed to dispence your beer and also gives you the option or force carbonating your beer.
    £8.95
    Add:


  • Two Keg CO2 Dual Gauge Regulator with 3/8 John Guest Outlet Manifolds
    Suitable for gassing two kegs at a time.   CO2 professional Dual Gauge Regulator. CO2 pressure reducer with one free outlet – G3/4 – red mark 7 bar – bottle connection w21.8mm ch30. Comes with two manifold outlet fitted with John Guest which takes 3/8 gas line for ease of use. The manifold outlet is fitted with an open / close valve. These are top of the range regulators.   7 Bar (100PSI)   These pressure regulators fully...
    £110.00
    Sold Out


  • Universal Poppet
    Universal Poppet works in a variety of keg types. Spring provides that inside pressure that your ball or pin lock disconnects depress when connected.
    £2.00
    Add:





main small