Fittings



  • 1/2 Inch NPT Flat Gasket
    These 1/8" thick flat gaskets custom cut and we use them for all bulkheads and make-weldless kits for 1/2" NPT threaded components. These are much more forgiving to over tightening situations where orings would just deform out of position.
    £1.00
    Sale: £0.95
    Save: 5% off
    Add:


  • 1/2 NPS Locknut with Groove
    1/2" NPS Stainless Steel Locknut Straight threaded with groove for o-ring. Fits the 1/2" Fitting sets.  Will seat fully down any 1/2" NPT male thread.
    £1.95
    Sale: £1.85
    Save: 5% off
    Add:


  • 1/2" NPS Flange Locknut without Groove
    1/2" NPS Stainless Steel FLANGE style Locknut . Straight threaded with flat flange, used with flat style gaskets.
    £2.50
    Sale: £2.38
    Save: 5% off
    Add:


  • 3/4 Inch NPT Flat Gasket
    These 1/8" thick flat gaskets custom cut and we use them for all bulkheads and make-weldless kits for 3/4" NPT threaded components. These are much more forgiving to over tightening situations where orings would just deform out of position.
    £1.00
    Sale: £0.95
    Save: 5% off
    Add:


  • Brass Ball Valve -1/2" MPT
    Brass Ball Valve 1/2" MPT 1/2" female NPT threads on the outlet, 1/2" male NPT treads on the inlet.
    £13.95
    Sale: £13.25
    Save: 5% off
    Add:


  • Female SS Quick Disconnect with 5/8 barb
    Female QD/ 5/8" Hose Barb. The ID of the barb is a full flow 1/2" ID and 1/2" ID silicone tubing will stretch over the 5/8" barb with very little effort.
    £8.95
    Sale: £8.50
    Save: 5% off
    Add:


  • Heavy Duty Weldless Bulkhead - 1/2" MPT x 1/2" FPT
    Add a bulkhead to your kettle, fermentor or any thin walled container. This bulkhead fitting has all of the seals and lock nuts you will need, with the quality and durability of 304 Grade Stainless Steel and high temp silicone seals. All you have to do is drill a hole and mount it! Hole size is 13/16" to 7/8".
    £11.95
    Sale: £11.35
    Save: 5% off
    Add:


  • Premium Keg/ Cooler Weldless Bulkhead -1/2" NPT
    The Bulkhead Fitting is a stainless steel bulkhead connector used for cooler conversions. The total length is 2 1/2". This bulkhead is for premium kegs that have a wall thickness between 3/8" minimum and maximum 9/16". A pre drilled hole that is 7/8" in size is required for installation.
    £13.95
    Sale: £13.25
    Save: 5% off
    Add:


  • Quick Disconnect 1/2" Female - 1/2" Male (Stainless Steel)
    This 304 stainless steel female quick disconnect easily attaches to a male QD and quickly seals. This QD features a 1/2" Male Pipe Thread on the ends for easy connectivity to your ball valve or 1/2 in. coupling.
    £6.95
    Sale: £6.60
    Save: 5% off
    Add:


  • Stainless Carbonator with 5/16" Barb
    These stainless steel carbonation caps are intended to convert 1L and 2L bottles to pressurised growlers.  Fill up a 1L or 2L PET bottle with your beer.  Put one of these on (purge the head space by squeezing if you want to) and then pressurise for transport.  You can also use this cap to rapidly carbonate beer.  Same process as for transport, just shake it up until it’s carbonated.
    £13.95
    Sale: £13.25
    Save: 5% off
    Add:


  • Stainless PET Bottle Carbonator
    Carbonation cap for PET bottles. Stainless steel design. No plastic parts. Works for standard PET bottles. Perfect for taking some beer on the road or making a small two liter carbonated cooler or soda water.Uses a ball lock GAS disconnect to get the gas in the bottle
    £13.95
    Sale: £13.25
    Save: 5% off
    Add:


  • Stainless Steel Dual Threaded Fitting for Wooden Tap Handles
    Your custom made tap handle will be the talk of the party!   You can create your own tap handle and mount it with this threaded insert. Simply drill a 1/2" hole in the bottom of your wooden piece and thread the fitting with a flathead screwdriver (a coin can also be used in a pinch!). When you’re finished, mount your custom tap handle to your faucet, pull a pint and admire your handiwork!   Internal threads are 3/8 inch.
    £1.85
    Sale: £1.76
    Save: 5% off
    Add:


  • Stainless Steel HERMS Bulkhead 1/2" Male NPT x 1/2" Compression
    Stainless Steel HERMS Bulkhead - 1/2" Male NPT x 1/2" Compression This is a custom made weldless compression bulkhead that can be used to install a 1/2" HERMS coil into any kettle or keggle. The forward locknut is permanently welded to the assembly for a solid point to screw the bulkhead into place and to minimize leakage.
    £13.95
    Sale: £13.25
    Save: 5% off
    Add:


  • Stainless Steel HERMS Bulkhead 1/2" Male NPT x 3/8" Compression
    Stainless Steel HERMS Bulkhead - 1/2" Male NPT x 3/8" Compression This is a custom made weldless compression bulkhead that can be used to install a 3/8" HERMS coil into any kettle or keggle. The forward locknut is permanently welded to the assembly for a solid point to screw the bulkhead into place and to minimise leakage.
    £12.95
    Sale: £12.30
    Save: 5% off
    Add:


  • Stainless Steel HERMS Bulkhead 1/2" Male NPT x 5/8" Compression
    Stainless Steel HERMS Bulkhead - 1/2" Male NPT x 3/8" Compression This is a custom made weldless compression bulkhead that can be used to install a 3/8" HERMS coil into any kettle or keggle. The forward locknut is permanently welded to the assembly for a solid point to screw the bulkhead into place and to minimise leakage.
    £12.95
    Sale: £12.30
    Save: 5% off
    Add:


  • Stainless Steel In-line Oxygenation Assembly (with Barbs)
    This is a product that many professional breweries use in their pilot systems. It is easy to use and easy to clean. Needs an additional source of oxygen (not included). This completely stainless, inline oxygenation system injects oxygen into your wort as it travels from your wort chiller to fermentor and allows you to read the temperature coming out of your wort chiller at the same time. It has a 2" stainless thermometer and a 2 micron diffusion...
    £50.00
    Sale: £47.50
    Save: 5% off
    Add:


  • Stainless Steel Male Quick Disconnect - 1/2" Female NPT
    This stainless steel male quick-disconnect (QD) has a 1/2" female NPT fitting on the end for easy integration into a ball valve with a male NPT thread, an existing 1/2" NPT nipple/bulkhead or as a weldless fitting with a nipple.
    £4.95
    Sale: £4.70
    Save: 5% off
    Add:


  • Stainless Steel Male Quick Disconnect 1/2" Barbed
    Made from 304 stainless steel, this is a quick disconnect that seals up very well without a lot of work in connceting them. These feature a 1/2" barbed end for easy connectivity to any 1/2" tubing you may have. Will hold pressure for typical brewing applications when moving liquids. Snaps perfectly into: Quick Disconnect 1/2" Female - 1/2" Male (Stainless Steel)
    £5.95
    Sale: £5.65
    Save: 5% off
    Add:


  • Stainless Steel Male Quick Disconnect 3/8" Barbed
    Made from 304 stainless steel, this is a quick disconnect that seals up very well without a lot of work in connceting them. These feature a 3/8" barbed end for easy connectivity to any 3/8" tubing you may have. Will hold pressure for typical brewing applications when moving liquids. Snaps perfectly into: Quick Disconnect 1/2" Female - 1/2" Male (Stainless Steel)
    £5.95
    Sale: £5.65
    Save: 5% off
    Add:


  • Stainless Steel Male Quick Disconnect 5/8" Barbed
    Made from 304 stainless steel, this is a quick disconnect that seals up very well without a lot of work in connceting them. These feature a 5/8" barbed end for easy connectivity to any 5/8" tubing you may have. Will hold pressure for typical brewing applications when moving liquids. Snaps perfectly into: Quick Disconnect 1/2" Female - 1/2" Male (Stainless Steel)
    £5.95
    Sale: £5.65
    Save: 5% off
    Add:


  • Stainless Steel Temperature Bulkhead - 1/4" Male NPT x 1/4" Comp
    This design is for installing a 1/4" temperature sensor through a vessel wall without welding! Single-piece design prevents the leakage and cleaning hassles from weldless fittings put together from plumbing parts and washers. The most unique feature is the face-sealing silicone o-ring grooves. Grooves are machined in the face of the fitting and locknut, eliminating the leakage associated with weldless fittings that attempt to seal near the...
    £11.95
    Sale: £11.35
    Save: 5% off
    Sold Out


  • Stainless Steel Weldless Bulkhead-1/2" MPT x 1/2" FPT
    For attaching ball valves, thermometers, etc to kettles with a 7/8" hole, the Weldless Bulkhead fitting proves easier to tighten with wrench(es) than standard bulkhead fittings. The extended bolt length allows for easy attachment of fittings such as ball valves or couplers.
    £12.95
    Sale: £12.30
    Save: 5% off
    Add:


  • Stainless Steel XL Cooler Weldless Bulkhead -1/2" NPT
    This Stainless Cooler Conversion Kit is larger to accommodate coolers with thicker sidewalls. Everything is stainless except the locknut, which is brass. This fitting makes it easy to attach a thermometer to your cooler.
    £12.95
    Sale: £12.30
    Save: 5% off
    Add:


  • Thru-Wall Bulkhead Fitting - Stainless Steel (1/2" Female NPT)
    Made from Stainless Steel, designed for tighter spaces on brew pots and kettles. Used in many applications and threads in any half inch part. Go weldless with thermometers, thermowells, ball valves and more. This product uses a 3/4" nipple. This bulkhead fitting is for products with a wall thickness a maximum of 3/8". Total length is 1". Requires a 1" hole for installation.
    £7.95
    Sale: £7.55
    Save: 5% off
    Add:


  • Variable Length Bulkhead - 1/2"NPS x 2.5"L
    Variable length bulkhead - This bulkhead is designed to accommodate all wall thicknesses of UP TO 1.5". The threaded nipple is straight thread rather than tapered (NPT) therefore the locknuts can thread the entire length.   This bulkhead is especially well suited for that you must drill through the wall instead of taking advantage of an existing spout. The thick flat silicone washers much less likely to slip out from under the locknut and...
    £11.95
    Sale: £11.35
    Save: 5% off
    Sold Out


  • Weldless Bulkhead - With 1/2" NPT Male Threads
    Use this 2.5 inch all thread nipple to add a valve to a kettle or mash tun or to add bulkhead to anything you like. With the all thread nipple at 2.5 inches you can fit through just about any cooler, mash tun, or kettle.
    £13.95
    Sale: £13.25
    Save: 5% off
    Add:


  • Weldless Sight Gauge 11 inch with 1/2 inch NPT Fittings
    With this sight gauge you can now monitor the liquid level visually without opening up your kettle. All metal parts in contact with the beer are 100% stainless steel, and the gasket is a high temp, food-grade material. You will need to drill a 7/8inch hole in your kettle.
    £22.95
    Sale: £21.80
    Save: 5% off
    Add:


  • Weldless Sight Gauge 16 inch with 1/2 inch NPT Fittings
    With this sight gauge you can now monitor the liquid level visually without opening up your kettle. All metal parts in contact with the beer are 100% stainless steel, and the gasket is a high temp, food-grade material. You will need to drill a 7/8inch hole in your kettle.
    £26.95
    Sale: £25.60
    Save: 5% off
    Add:





main small