This is a homebrew immersion chiller which fits all boilers, and works quickly to cool the wort thus greatly reducing the risk of bacteria entering your wort during a long cooling period. Connect a garden hose from the cold water supply to your chiller using two jubilee clips. Connect another length of hose to the other end of the chiller again using two jubilee clips and run this into a drain or sink. Ensuring the chiller is clean; place it in the boiling wort, so that the copper coil is submerged, for the final 5 minutes. Turn off the heat and start to run cold water through the chiller.
The dimensions are: coil - height approx 18cm, width approx 13cm. total height approx 50cm
