Barrel Spares


     
Co2 Bulbs 8g Heimo (10 per Box)
Spare 8g CO2 gas bulbs for your CO2 gas injector. more info
£7.45
Add:
Hambleton bard S30 8g bulb holder
The new stainless steel insert S30 holder for 8g bulbs, It has long been a problem that the threads wear out in a normal plastic or nylon bulb holder... more info
£4.65
Add:
Keg Cap 4 inch Drilled - No Valve
Replacement Keg Cap 4 inch Drilled - No Valve more info
£5.34
Add:
King Keg 4" S30 Pin Valve RB Cap + 'O' Ring
Out Of Stock
This cap will fit both the King Keg Bottom and Top Tap Barrels. Comes with O Ring and inlet/pressure relief valve. more info
£15.95
King Keg 4" S30 RB Cap + 'O' Ring
This cap will fit both the King Keg Bottom and Top Tap Barrels. Comes with O Ring and inlet/pressure relief valve. more info
£17.95
Add:
Latstock Beer Float
Out Of Stock
This cap will fit both the King Keg Bottom and Top Tap Barrels. Comes with O Ring and inlet/pressure relief valve. more info
£10.95
N2O Bulbs 8g Heimo (10 per Box)
10 disposable 8 gram bulbs filled with Nitrogen gas. Perfect for stouts, and all draught beers. Gives a much smoother beer that's much easier to... more info
£5.95
Add:
Pin Valve S-30
S30 replacement valve with pin (8g CO2 bulbs only) as used on the S30 cap fitted to most pressure barrels for homebrew use, such as the Rotokeg,... more info
£13.95
Add:
S30 Pin Connector (Hambleton Bard)
Out Of Stock
The new S30 Valve for your keg comes in high grade stainless steel. The S30 valve is equipped with a small piercing pin if you want to use 8g CO2... more info
£12.45
Sealing Wax for Wooden Casks 500g
Sealing wax Natural vegetable wax for closing small leaks in wooden barrels. Can be used on wet wood. Content: 500 g. more info
£9.95  £6.96
Save: 30%
Add:
Spare Plastic Bulb Holder
A replacement bulb holder for the microbrewery. Colour may vary more info
£3.45
Add:
Stainless Steel Pin Valve C/W Red Plastic Bulb Holder
A replacement bulb holder for the microbrewery and S30 steel pin valve. more info
£13.25
Add:
Young's Cap/ Injector/ Relief Valves Spare
Out Of Stock
A repair kit for use with a King Keg 4 inch Cap or a Basic Barrel 2 inch Cap. The pack contains a white outlet rubber for the brass valve and all the... more info
£5.45
Young's STD CO2 Inlet / Outlet Valve (Brass)
A valve for injecting gas using an S30 Cylinder. more info
£12.45
Add: