Fittings


     
1/2 inch NPS Locknut with Groove
1/2" NPS Stainless Steel Locknut Straight threaded with groove for o-ring. Fits the 1/2" Fitting sets.  Will seat fully down any... more info
£2.00
Add:
1/2 Inch NPT Flat Gasket
These 1/8" thick flat gaskets custom cut and we use them for all bulkheads and make-weldless kits for 1/2" NPT threaded components. These are much... more info
£1.00
Add:
1/2" NPT Male x 1/2" Barb Straight Hose Fitting
Out Of Stock
Allows you to connect 3/8" or 1/2" ID tubing to the ball valve. more info
£4.00
1/2" NPT Male x 3/8" Barb Straight Hose Fitting
Allows you to connect 3/8" or 1/2" ID tubing to the ball valve. more info
£4.00
Add:
1/2" NPT Stainless Steel 3 Piece Ball Valve
Stainless Steel Construction 3 Piece Design Insulated Handle 1/2" Female NPT Threads more info
£25.00  £17.50
Save: 30%
Add:
1/2"NPS Flange Locknut without Groove
1/2" NPS Stainless Steel FLANGE style Locknut . Straight threaded with flat flange, used with flat style gaskets. more info
£2.75
Add:
2 Piece Ball Valve -1/2" SS316
Full port stainless steel ball valves and a lock out handle. more info
£17.00
Add:
3/4 Inch NPT Flat Gasket
These 1/8" thick flat gaskets custom cut and we use them for all bulkheads and make-weldless kits for 3/4" NPT threaded components. These are much... more info
£1.00
Add:
Brass Ball Valve -1/2" MPT
Brass Ball Valve 1/2" MPT 1/2" female NPT threads on the outlet, 1/2" male NPT treads on the inlet. more info
£10.00
Add:
Butterfly Clips LARGE 1/4" - 7/8"
Handy for tightening all that loose home brew tubing. more info
£2.25
Add:
Butterfly Clips SMALL 1/8" - 1/2"
Handy for tightening all that loose home brew tubing. more info
£2.25
Add:
Cooler Weldless Bulkhead O-Ring Set
A replacement set of silicone o-rings for the Cooler bulkhead. more info
£1.90
Add:
Female Quick Disconnect - 5/8" barb
Female QD/ 5/8" Hose Barb. The ID of the barb is a full flow 1/2" ID and 1/2" ID silicone tubing will stretch over the 5/8" barb... more info
£8.00  £5.60
Save: 30%
Add:
Female Quick Disconnet - 1/2" Male NPT
This 304 stainless steel female quick disconnect easily attaches to a male QD and quickly seals. This QD features a 1/2" Male Pipe Thread on the... more info
£8.00
Add:
Female SS Quick Disconnect with 1/2 inch barb
Out Of Stock
Connects to either a male x 1/2" NPT or male x 1/2" Female NPT more info
£8.95
Heavy Duty Weldless Bulkhead - 1/2" MPT x 1/2" FPT
Add a bulkhead to your kettle, fermentor or any thin walled container. This bulkhead fitting has all of the seals and lock nuts you will need, with... more info
£10.00
Add:
Jubilee Clips LARGE 10~16mm
Handy for tightening all that loose home brew tubing. more info
£0.90
Add:
Jubilee Clips SMALL 6~13mm
Out Of Stock
Handy for tightening all that loose home brew tubing. more info
£1.00
Kettle/Keg Weldless Bulkhead O-Ring Set
A replacement set of silicone o-rings for the kettle bulkhead fitting. more info
£1.90
Add:
Male Quick Disconnect - 1/2" Male NPT
These male quick disconnect couple with the stainless female quick disconnects. more info
£5.00
Add:
Male Quick Disconnect - 1/2" Female NPT
This stainless steel male quick-disconnect (QD) has a 1/2" female NPT fitting on the end for easy integration into a ball valve with a male NPT... more info
£5.00
Add:
Male Quick Disconnect 5/8" Barbed
Made from 304 stainless steel, this is a quick disconnect that seals up very well without a lot of work in connceting them. These feature a 5/8"... more info
£5.50
Add:
Premium Keg/ Cooler Weldless Bulkhead -1/2" NPT
The Bulkhead Fitting is a stainless steel bulkhead connector used for cooler conversions. The total length is 2 1/2". This bulkhead is for premium... more info
£8.50
Add:
Quick Disconnect Female to 1/2" NPT Female (Stainless Steel)
Out Of Stock
When used with the Female QD these quick disconnect seal up in either flow direction. These feature are 1/2" Female National Pipe Thread on the... more info
£8.75
Quick Disconnect Male to 3/4" NPT Male (Stainless Steel)
These male quick disconnect couple with the stainless female quick disconnects. more info
£5.00
Add:
Single Body Weldless Bulkhead x 1/2 inch Female NPT
Out Of Stock
Bulkhead fitting for kettles. Can be used for connecting your ball valve tap and your bazooka screen when constructing your homebrew kettle. more info
£11.50
Single Body Weldless Bulkhead x 1/2" Male NPT
Use this 2 inch all thread nipple to add a valve to a kettle or mash tun or to add bulkhead to anything you like. With the all thread nipple at 2.5... more info
£12.00
Add:
SS 1/2 Inch Barb x 1/2 Inch Female NPT
Stainless Steel 1/2" FPT To 1/2" barb can be attached to any 1/2" MPT. more info
£4.45
Add:
SS Full Coupler - 1/2 inch NPT x 1 inch Long
Full coupler with ½ inch female pipe thread. Full couplers have threads for insertion from both sides. more info
£5.00
Add:
SS HERMS Bulkhead 1/2" Male NPT x 1/2" Compression
Stainless Steel HERMS Bulkhead - 1/2" Male NPT x 1/2" Compression This is a custom made weldless compression bulkhead that can be used to... more info
£13.50  £8.10
Save: 40%
Add:
SS Weldless Bulkhead-1/2" MPT x 1/2" FPT
For attaching ball valves, thermometers, etc to kettles with a 7/8" hole, the Weldless Bulkhead fitting proves easier to tighten with wrench(es)... more info
£12.00
Add:
SS XL Cooler Weldless Bulkhead -1/2" NPT
This Stainless Cooler Conversion Kit is larger to accommodate coolers with thicker sidewalls. more info
£11.00
Add:
Stainless Carbonator with 5/16" Barb
These stainless steel carbonation caps are intended to convert 1L and 2L bottles to pressurised growlers.  Fill up a 1L or 2L PET bottle with... more info
£13.00  £8.45
Save: 35%
Add:
Stainless PET Bottle Carbonator
Out Of Stock
Carbonation cap for PET bottles. Stainless steel design. No plastic parts. Works for standard PET bottles. Perfect for taking some beer on the road... more info
£12.50
Stainless Socket Banded - 1/2 Inch
Out Of Stock
Stainless Socket Banded - Takes half inch on either side. more info
£4.45
Stainless Steel Cooler Weldless Bulkhead -1/2" NPT
The Bulkhead Fitting is a stainless steel bulkhead connector used for cooler conversions. more info
£11.00
Add:
Stainless Steel Dual Threaded Fitting for Wooden Tap Handles
Your custom made tap handle will be the talk of the party!   You can create your own tap handle and mount it with this threaded insert. Simply... more info
£1.90
Add:
Stainless Steel HERMS Bulkhead 1/2" Male NPT x 3/8" Compression
Stainless Steel HERMS Bulkhead - 1/2" Male NPT x 3/8" Compression This is a custom made weldless compression bulkhead that can be used to install a... more info
£13.50
Add:
Stainless Steel HERMS Bulkhead 1/2" Male NPT x 5/8" Compression
Stainless Steel HERMS Bulkhead - 1/2" Male NPT x 3/8" Compression This is a custom made weldless compression bulkhead that can be used to install a... more info
£10.00
Add:
Stainless Steel In-line Oxygenation Assembly
This is a product that many professional breweries use in their pilot systems. It is easy to use and easy to clean. Needs an additional source of... more info
£45.00
Add:
Stainless Steel Kettle Weldless Bulkhead -1/2" NPT
Bulkhead fitting for kettles. Can be used for connecting your ball valve tap and your bazooka screen when constructing your homebrew kettle. more info
£11.00
Add:
Stainless Steel Male Quick Disconnect 1/2" Barbed
Made from 304 stainless steel, this is a quick disconnect that seals up very well without a lot of work in connceting them. These feature a 1/2"... more info
£5.00
Add:
Stainless Steel Male Quick Disconnect 3/8" Barbed
Made from 304 stainless steel, this is a quick disconnect that seals up very well without a lot of work in connceting them. These feature a 3/8"... more info
£5.00
Add:
Stainless Steel Nipple 1/2" NPT x 1" Length
304 Stainless Steel Nipple 1/2" X 1/2" NPT (1" in length). Used to combine two fittings with 1/2" FPT threads. more info
£4.45
Add:
Stainless Steel Nipple 1/2" NPT x 1.5" Length
304 Stainless Steel Nipple 1/2" X 1/2" NPT (1.5" in length). Used to combine two fittings with 1/2" FPT threads. more info
£4.00
Add:
Stainless Steel Nipple 1/2" NPT x 2" Length
304 Stainless Steel Nipple 1/2" X 1/2" NPT (2" in length). Used to combine two fittings with 1/2" FPT threads. more info
£4.00
Add:
Stainless Steel Sight Gauge Adapter with Plug
Stainless sight gauge adapter with plug. It has a 1/2" MPT and 1/8" FPT to screw the sight gauge into. more info
£6.00
Add:
Stainless Steel Temperature Bulkhead - 1/4" Male NPT x 1/4" Comp
This design is for installing a 1/4" temperature sensor through a vessel wall without welding! Single-piece design prevents the leakage and cleaning... more info
£12.00
Add:
Thru-Wall Bulkhead Fitting - SS (1/2" Female NPT)
Made from Stainless Steel, designed for tighter spaces on brew pots and kettles. Used in many applications and threads in any half inch part. Go... more info
£7.00
Add:
Variable Length Bulkhead - 1/2"NPS x 2.5"L
Variable length bulkhead - This bulkhead is designed to accommodate all wall thicknesses of UP TO 1.5". The threaded nipple is straight thread... more info
£10.00
Add:
Weldless Kettle Bulkhead - 1/2" Flat Gasket
Used in attaching fittings such as ball valves and bazooka screens to your kettle.   The product total length is 2” and it uses a 3/4”... more info
£8.95
Add:
Weldless Sight Gauge 11 inch with 1/2 inch NPT Fittings
Please note: These sight gauges do not include o-rings, washers or back nuts. With this sight gauge you can now monitor the liquid level visually... more info
£22.00  £13.20
Save: 40%
Add:
Weldless Sight Gauge 16 inch with 1/2 inch NPT Fittings
Please note: These sight gauges do not include o-rings, washers or back nuts. With this sight gauge you can now monitor the liquid level visually... more info
£27.00
Add: